HOME / Optical Modules

HSOM-800-DR-C2S9 800G OSFP224 DR4 Closed-top

High-speed optical transceiver module designed for data center, Ethernet and InfiniBand networking applications, delivering reliable connectivity over single-mode fiber with low power consumption.

800G OSFP224 DR4 Closed-top Pluggable Optical Transceiver

The KTB HSOM-800-DR-C2S9 transceiver is designed for 800G Ethernet and InfiniBand communication links over 500m of single-mode fiber (SMF). It is compliant with OSFP MSA, CMIS 5.3 and IEEE802.3dj standards.

HSOM-800-DR-C2S9 800G OSFP224 DR4 Closed-top

The optical signal is transmitted over four parallel channels at a central wavelength of 1310nm. The module contains 4 parallel channels on the transmitter and receiver, each operating at 212.5Gbps. The optical interface is a single MPO-12/APC connector.

Datasheet

Features:

  • OSFP MSA 5.22 and CMIS 5.3 compliant
  • Single MPO-12/APC optical connector
  • 4×212.5Gbps (106.25GBd PAM4) electrical interface
  • 4×212.5Gbps (106.25GBd PAM4) optical interface
  • Up to 500m over SMF
  • Power dissipation ≤16W
  • Operating case temperature: 0°C to 70°C
  • Compliant with IEEE802.3dj 800GBASE-DR4 and 800GAUI-4 C2M
  • Built-in digital diagnostic functions
  • 3.3V power supply voltage
  • RoHS compliant

    • Applications:

  • 800G Ethernet
  • Data center networks
  • InfiniBand XDR


    • Model Data Rate / Interface Reach Power Dissipation Optical Connector Datasheet
    HSOM-800-DR-C2S9 800G OSFP224 DR4 Closed-top Up to 500m over SMF ≤16W Single MPO-12/APC Datasheet

    Operating Conditions:

    Power supply voltage: 3.135V to 3.465V, 3.3V typical
    Power supply current: 5111mA max
    Case operating temperature: 0°C to 70°C
    Relative humidity: 15% to 85%, non-condensing
    I2C clock frequency: 100kHz to 400kHz
    Power on initialization time: 2000ms max